P2402: Evaporative Emission System Leak Detection Pump Control Circuit High
Code P2402 means “Evaporative Emission System Leak Detection Pump Control Circuit High.” It’s listed under emission controls (EGR and particulate filter). Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.
Common causes of P2402
- Faulty sensor or actuator
- Damaged or corroded wiring or connector
- Fuse or relay
- ECU failure (uncommon)
What to check, from cheapest to most expensive
- Read the code and its freeze frame data
- Watch live data from the affected system
- Check connectors and wiring before replacing parts
A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.
Related codes
P2400Evaporative Emission System Leak Detection Pump Control Circuit/OpenP2401Evaporative Emission System Leak Detection Pump Control Circuit LowP2403Evaporative Emission System Leak Detection Pump Sense Circuit/OpenP2404Evaporative Emission System Leak Detection Pump Sense Circuit Range/PerformanceP2405Evaporative Emission System Leak Detection Pump Sense Circuit LowP2406Evaporative Emission System Leak Detection Pump Sense Circuit HighP2407Evaporative Emission System Leak Detection Pump Sense Circuit Intermittent/ErraticP2408Fuel Cap Sensor/Switch Circuit