P2288: Injector Control Pressure Too High
Code P2288 means “Injector Control Pressure Too High.” It’s listed under fuel, air, and exhaust aftertreatment (particulate filter, AdBlue, NOx). Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.
Common causes of P2288
- Faulty or dirty injector
- Injector wiring or connector
- ECU control circuit
What to check, from cheapest to most expensive
- Measure the injector resistance
- Check injector balance or return flow
A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.
Related codes
P2281Air Leak Between MAF and Throttle BodyP2282Air Leak Between Throttle Body and Intake ValvesP2283Injector Control Pressure Sensor CircuitP2284Injector Control Pressure Sensor Circuit Range/PerformanceP2285Injector Control Pressure Sensor Circuit LowP2286Injector Control Pressure Sensor Circuit HighP2287Injector Control Pressure Sensor Circuit IntermittentP2289Injector Control Pressure Too High - Engine Off