Download the app
OBD-II fault code

P2138: Throttle/Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation

Code P2138 means “Throttle/Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation.” It’s listed under fuel, air, and exhaust aftertreatment (particulate filter, AdBlue, NOx). Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.

Can I keep driving?Usually yes, with care, but get it checked soon: a small fault can get worse, and with the check engine light on, the car wouldn’t pass inspection.

Common causes of P2138

  • Crankshaft or camshaft position sensor
  • Stretched or jumped timing chain or belt
  • Variable valve timing actuator (VVT)
  • Low oil level or pressure (VVT actuator)

What to check, from cheapest to most expensive

  1. Check the oil level and condition
  2. Check crank/cam correlation in live data
  3. Inspect the timing chain or belt if the code persists

A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.

Related codes