P0803: 1-4 Upshift (Skip Shift) Solenoid Control Circuit
Code P0803 means “1-4 Upshift (Skip Shift) Solenoid Control Circuit.” It’s listed under transmission. Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.
Common causes of P0803
- Faulty sensor or actuator
- Damaged or corroded wiring or connector
- Fuse or relay
- ECU failure (uncommon)
What to check, from cheapest to most expensive
- Read the code and its freeze frame data
- Watch live data from the affected system
- Check connectors and wiring before replacing parts
A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.
Related codes
P0801Reverse Inhibit Control CircuitP0802Transmission Control System MIL Request Circuit/OpenP08041-4 Upshift (Skip Shift) Lamp Control CircuitP0805Clutch Position Sensor CircuitP0806Clutch Position Sensor Circuit Range/PerformanceP0807Clutch Position Sensor Circuit LowP0808Clutch Position Sensor Circuit HighP0809Clutch Position Sensor Circuit Intermittent