P0314: Single Cylinder Misfire (Cylinder not Specified)
Code P0314 means “Single Cylinder Misfire (Cylinder not Specified).” It’s listed under ignition and misfires. Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.
Common causes of P0314
- Worn or broken spark plug
- Ignition coil or its connector
- That cylinder’s injector leaking or not opening
- Low compression (valves, piston rings, head gasket)
What to check, from cheapest to most expensive
- Swap the coil with another cylinder’s and see if the misfire follows it
- Check the spark plugs and their gap
- Run a compression test on the cylinder
- Watch each cylinder’s misfire counter in live data
A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.
Related codes
P0310Cylinder 10 Misfire DetectedP0311Cylinder 11 Misfire DetectedP0312Cylinder 12 Misfire DetectedP0313Misfire Detected with Low FuelP0315Crankshaft Position System Variation Not LearnedP0316Engine Misfire Detected on Startup (First 1000 Revolutions)P0317Rough Road Hardware Not PresentP0318Rough Road Sensor 'A' Signal Circuit